pond waterfall, waterfall kit, build a waterfall

AbsolutePonds.com - America's Leading Pond and Water Garden Supplier

Pond - Water Garden - Fish Pond - Koi Pond - Pond Supplies including - Garden Fountain - Pumps - Pond Kits - Aerators - Pond Liners - Preformed Waterfalls - Water Garden Books - Pond Building Information - Pond Heaters - UV Sterilizers - Everything

Pond Waterfall, Waterfall Unit

To build a great looking waterfall, use either our Aquafall waterfall unit, our EP Waterfall Spillway or our Just-a-Falls waterfall units.

AquaFalls™
A waterfall unit including a mechanical filter, biological filter and waterfall unit all-in-one!

Aquafalls units are available in 3 different sizes, each unit provides complete mechanical and biological filtration as well as a housing for the beginning of a waterfall or stream. Simply bury in the ground for minimal water drop or raise to create a more dramatic waterfall effect.

AquaFalls filters are easy to install! With other biological waterfalls you have to bolt the front lip to the filter then use expanding foam to hold the fake rock lip in place. The AquaFalls filter has a simulated rock lip built right into the lip so you don't need to mess around with the expandable foam and hiding the edge. Simply bolt the rock lip to the filter and you're done!

AquaFalls are also exceptional in that they offer the landscaper (or of course, the homeowner too) complete flexibility in the location of attaching the pump tubing to the AquaFalls. Other units only offer the plumbing attachment in the back but the AquaFalls unit offers an opening on the right AND left side of the unit, making water flow greater and less plumbing "elbows" to deal with (which cuts down water pressure). Having an opening on both sides of the unit also provides an option to use one opening for a drain while the other opening is used for the inlet of water. Using an optional drain feature is ideal for cleaning the unit. Simply let the water run in through one side of the filter and let the dirt and debris go out the other side! You would need an optional ball valve to attach to the other opening when not draining or cleaning the filter. Simply keep the valve closed when the AquaFalls is in use and open the valve when you want to clean the filter. Ball valve not included. If you decide not to use the second opening, we've included a bulkhead plug which will tightly plug the second opening and stop from any water loss. Each AquaFalls filter includes an internal filter support stand which keeps the filter pads off the bottom of the filter to prevent plugging.

Use more than one AquaFalls for a truly dynamic waterfall effect!

NEW, 2007! Now the small, medium and large Aquafalls comes with an optional rock grate as shown below! Now you can camouflage the unit by placing rocks on the top!

Mini Aquafalls
New mini-sized Aquafalls for small ponds up to 1500 gallons. One piece design (lip is molded into filter tub) for super easy installation. Pond liner (not included) from mini Aquafalls to pond (for stream bed) is bolted to face of filter for a water tight seal. 1 1/2" inlet fitting in back of filter, 14" wide waterfall opening, provides biological filtration for ponds up to 1500 gallons. Comes standard with 2 filter pads and 1 large mesh bags for filter media. Measures 18" x 24" x 18". Maximum recommended flow rate 40 GPM. Ships via UPS oversize 1.

Product Code: SCAT
Price: $269.00
BUY!

Replacement Filter Pads
(2 per Aquafalls filter required) Sold individually.
Product Code: SCATM
Price: $16.00

BUY!

Small AquaFalls
Provides bio-filtration for ponds up to 200 square feet and/or approx. 2500 gallons. Includes two 2" bulkhead fittings allowing you to enter from either the left or right side of the filter. Filter comes standard with 3 filter pads and 2 mesh bags for filter media (lava rock or bio-balls, not included). 18" wide opening for waterfall. Unit is 26" wide, 26" deep and 26" high. Maximum recommended flow rate 70 GPM. Ships via UPS oversize 2.

Product Code: SCAS
Price: $395.45
BUY!

Replacement Filter Pads
(3 per Aquafalls filter required.) Sold individually.
Product Code: SCASM
Price: $18.50

BUY!

Small Rock Grate
Product Code: SCASGR
Price: $43.00

BUY!

Medium AquaFalls
Provides biological filtration for ponds up to 600 square feet and/or approx. 6000 gallons. Includes two 2" bulkhead fittings allowing you to enter incoming water from either side of the filter. Filter comes with 3 filter mats and 3 mesh bags for filter media (lava rocks or bioballs, not included). 26" wide waterfall opening. Unit is 36" wide, 32" deep and 28" high. Maximum recommended flow rate 120 GPM. Ships via motor freight 43 lbs.

Product Code: SCAMD
Price: $467.25
BUY!

Replacement Filter Pads
(3 per Aquafalls filter required). Sold individually.
Product Code: SCAMM
Price: $27.50

BUY!

Medium Rock Grate
Product Code: SCAMGR
Price: $115.00

BUY!

Shown with optional rock grate.

Large AquaFalls
Provides biological filtration for ponds over 700 square feet. Includes two 3" bulkhead fittings allowing you to enter incoming water from either side of the filter. Filter comes with 3 filter mats and 6 mesh bags for filter media (lava rocks or bio-balls, not included). Unit has 50" wide waterfall opening, is 67" wide (backside dimension), 36" deep and 36" high. Maximum recommended flow rate 250 GPM. Ships via motor freight. 73 lbs.

Product Code: SCALD
Price: $785.25
BUY!

Replacement Filter Pads
(3 per Aquafalls required.)
Sold individually.
Product Code: SCALM
Price: $38.50

BUY!

Large Rock Grate
Product Code: SCALGR
Price: $175.50

BUY!

NEW! EP Waterfall Spillway

Inward Curve

Outward Curve

'S' Shaped Curve

Now you can create a waterfall any width you want with our EP Waterfall Spillways!

EP Waterfall Spillway
Our waterfall spillway is the only expandable waterfall spillway on the market! The EP Waterfall Spillway consists of a left and right end piece which when bolted to each other form an 18" spillway. A 16" extension is also available which bolts in between the left and right end pieces. You can install as many of the 16" extensions as desired before attaching the ends. Waterfall spillways of 18", 34" and 50" will come assembled. Spillways over 50" wide will come unassembled due to shipping requirements. A bulkhead fitting is included for each end so water can enter from the left or right side! A plug is included to plug whichever end is not used.

Waterfall spillways are designed to sit inside the liner eliminating any concerns of leaking. The liner simply goes under the spillway and up the back side. The bulkhead fitting secures liner to tub where the hose enters the spillway.

Waterfall spillways have a plastic grating just below the water level which not only keeps the walls from bowing when buried in the ground but also allows you to stack 3 - 4" of rock to hide the spillway.

For curved waterfalls...

Use inward curving pieces to create a concave waterfall, use outward curving pieces to create a "peninsula" with water falling off three sides or use both styles combined together to create an "S" shaped waterfall! The straight, inward and outward pieces are interchangeable and can be used in any combination.

Product Code	Description	Ship Weight	Price	Buy!
SCEWS18	18" Spillway Assembled	16 lbs.	$255.00	BUY!
SCEWS34	34" Spillway Assembled	26 lbs.	$355.00	BUY!
SCEWS50	50" Spillway Assembled	36 lbs.	$499.00	BUY!
SCEWE16	16" Extension Module, straight	10 lbs.	$125.00	BUY!
SCEWLR2	Left/Right ends unassembled (set up for 2" pipe)	16 lbs.	$245.00	BUY!
SCEWLR3	Left/Right ends unassembled (set up for 3" pipe"	18 lbs.	$299.00	BUY!
SCEWI160	16" Extension Module, inward curve NEW!	10 lbs.	$165.00	BUY!
SCEWO16	16" Extension Module, outward curve NEW!	10 lbs.	$165.00	BUY!

Presenting our new...
"Just-a-Falls"
Pondless Waterfalls!

Now you can have a waterfall feature without having the pond with our
Just-a-Falls Waterfall feature!

Available in several sizes below. Choose the size to fit your needs.

Just-a-Falls Set Up

wpe2CF.jpg (73750 bytes)

Basic installation procedure: Dig hole for pond vault. Dig out shallow stream area. Install underlayment in stream. Install pond liner in stream. Connect pump tubing to pump. Place pump in pond vault. Dig out trench for tubing to run up to the top of the waterfall unit (Aquafalls). Connect to Aquafalls. Fill vault with water. Design top of vault area with rocks and stream bed.

Available in small, medium and large kits.

Each 'Just-a-Falls' rock pond and waterfall kit comes complete with everything you need (except the rocks). The kit includes:
45 mil EPDM pond liner, felt underlayment, EasyPro pond vault, submersible pump, check valve assembly, Aquafalls waterfall filter unit, flexible pvc pipe tubing, waterfall installation kit.

To view some photos of the Just-a-Falls kits installed, click here.

Small Just-a-Falls Kit

Ships via UPS. Makes 7' long stream, 18" wide waterfall.
Includes:

10' x 20' liner - enough for a 5' x 5' x 2' deep reservoir with 9' left over for stream.
10' x 20' underlayment
18" waterfall spillway
Easy Pro mini pond vault
TH150 pump - 2900 GPH with 2 year manufacturer's warranty.
Custom sized check valve assembly
25' roll of 2" flexible PVC pipe
Waterfall installation kit

Product Code: SCJAF1
List Price: $1,329.85
Our Price: $997.67

BUY!

Medium Just-a-Falls Kit
Ships via UPS. Makes 11' long stream, 34" wide waterfall. Includes:

10' x 25' pond liner (enough for a 5' x 6' x 2' deep reservoir with 14' left over for stream.
10' x 25' underlayment
34" waterfall spillway
EasyPro mini pond vault
TH400 pump - 4900 GPH pump, 2 year manufacturer's warranty
custom sized check valve assembly
25' roll of 2" flexible PVC pipe
waterfall installation kit

Product Code: SCJAF2
List Price: $1,696.50
Our Price: $1,412.00

BUY!

To view some photos of the Just-a-Falls kits installed, click here.

Large Just-a-Falls Kit
Ships via motor freight. Makes 18' long stream, 50" wide waterfall. Includes:

15' x 40' pond liner (enough for a 8' x 10' x 3' deep reservoir with 20' left over for stream)
15' x 40' underlayment
50" waterfall spillway
EasyPro large pond vault
EP10000 pump - 10,000 GPH pump with 1 year manufacturer's warranty
custom sized check valve assembly
33' roll of 3" flexible PVC pipe
waterfall installation kit

Product Code: SCJAF3
List Price: $2,782.50
Our Price: $2,322.00

BUY!

To view some photos of the Just-a-Falls kits installed, click here.

Extra Large Just-a-Falls Kit
Ships via motor freight. Makes 30' long stream, 82" wide waterfall.
Includes:

20' x 50' liner - enough for a 10' x 12' x 3' deep reservoir with 30' left over for stream
(2) 10' x 50' underlayment
82" wide waterfall spillway
EasyPro large pond vault
SCEP16000 pump - 16,000 GPH with one year manufacturer's warranty
custom sized check valve assembly
SCFP300 50' roll of 3" flexible pvc pipe
waterfall installation kit

Product Code: SCJAF4
List Price: $4,029.95
Our Price: $2,974.50

BUY!

To view some photos of the Just-a-Falls kits installed, click here.

Order Info | Contact Info