AbsolutePonds.com - America's Leading Pond and Water Garden Supplier


               

Pond - Water Garden - Fish Pond - Koi Pond - Pond Supplies including - Garden Fountain - Pumps - Pond Kits - Aerators - Pond Liners - Preformed Waterfalls - Water Garden Books - Pond Building Information - Pond Heaters - UV Sterilizers - Everything

 

 

Submersible Water Pumps, High Volume

Use any of these pumps for ponds, waterfalls, re-circulating systems, de-watering, and more. 
Choose from our large selection of pumps here

The listed below are in GPM (gallons per minute).  
To calculate the gallons per hour or GPH, multiply the GPM by 60.

wpe69.jpg (3522 bytes)

 High Volume Submersible Pump
These heavy duty, high volume cast iron pumps are perfect for large scale waterfalls.   All pumps have sealed bearings with a minimum of 10,000 hours operating life.  
  • 1,750 RPM motors
  • 3" NPT discharge
  • 115 or 230 volt motors
  • 1 phase motors in stock, 3 phase available by special order

PUMP SPECIFICATIONS

  • VOLUTE:  Cast iron, ASTM A-48 Class 30
  • MOTOR HOUSING:  Cast iron, ASTM A-48 Class 30
  • SEAL PLATE:  Cast iron, ASTM A-48 Class 30
  • IMPELLER:  2 vane, open, cast iron, ASTM A-48 Class 30, balanced for smooth opoeration
  • SHAFT:  Corrosion resistant stainless steel, threaded design
  • O-RING:  BUNA-N assures positive sealing against oil leakage
  • HARDWARE:  300 series stainless steel
  • MECHANICAL SEAL:  300 Stainless steel metal parts, BUNA-N elastomers, silicon carbide vs. silicon carbide
  • CABLE ENTRY:  Waterproof 33 ft. cord (plug on 115 volt) pressure grommet for sealing and strain relief
  • BEARINGS:  Upper and lower single row ball bearings
  • MOTOR:  Squirrel cage induction, 4 poles, oil-filled
  • Single phase:  115V/230V, 50 Hz, 1/2 - 2 HP permanent split capacitor type.   Three phase:  208/230V/460V dual, 60 Hz, 1/2 - 2HP. Built in thermal protector with automatic reset
  • INSULATION:  Class F

 

HP

GPM (gallons per minute) @ Foot of Head
5' 10' 15' 20' 25' 30' 35' 40'
1/2 160 130 100 62 18 - - -
3/4 178 152 120 90 52 15 - -
1 195 176 155 128 100 68 25 -
1.5 285 245 190 132 115 70 32 -

New, Lower Prices!

Product Code HP Volts Amps Ship wt. Price Buy
SCWQ50 1/2 115 8 65 $468.00 BUY!
SCWQ502 1/2 230 4 65 $478.00 BUY!
SCWQ75 3/4 115 10 80 $530.00 BUY!
SCWQ752 3/4 230 5 80 $540.00 BUY!
SCWQ100 1 115 14 92 $658.00 BUY!
SCWQ1002 1 230 7 92 $668.00 BUY!
SCWQ150
Our most powerful 115 volt pump we offer!  Check out the flow rates!  Great buy!		 1.5 115 16 107 $748.00 BUY!
SCWQ1502 1.5 230 8 107 $748.00 BUY!

 
 

wpe2B.jpg (1659 bytes)

 

Carry Horizontal Pump

 

 

 

 

 

 

 

 

 

 

 

 

 

 Super High Volume Submersible Pumps, low head
These high volume, low head pumps are truly in a class of their own!  All pumps feature Axial-flow lift for smooth, low vibration, low pressure operation.  Ideal pumps for large scale recirculation systems, de-watering, high volume water transfer and large waterfalls.  All pumps are available in single and three phase and are available with a variety of options including automatic on/off, alarm activation, delayed start and more.  Each pump has a 30' power cord and control box.  Prices are for 230 volt, single phase pumps.  Please inquire for pricing on all others.
  • 30 power cords standard - longer available
  • 1/2, 3/4 and 1 HP pumps do not require a control panel
  • 2 HP and larger pumps include a control panel.
  • ideal for low head, high volume waterfalls!
  • can use intake screen or intake horns below


Product Code HP Amps
@ 230 v.		 Discharge
Diameter		 Ship wt. Price Buy
SCCP50 1/2 6 4" 48 $1399.00 BUY!
SCCP75 3/4 8 4" 51 $1569.00 BUY!
SCCP100 1 9 4" 56 $1999.00 BUY!
SCCP402 2 11 4" 72 $2299.00 BUY!
SCCP403 3 14 4" 116 $2869.00 BUY!
SCCP605 5 23 6" 195 $3599.00 BUY!
SCCP607 7.5 36 6" 214 $4369.00 BUY!
SCCP610 10 44 6" 235 $4589.00 BUY!

 

These pumps are available with a high flow, low head impeller or a medium flow, medium head impeller for the same price.  Choose the pump style that best fits your needs.  Powered by water cooled, stainless steel Franklin motors.

Pumping Rates
Low Head/ High Volume Impeller

Product Code GPM (gallons per minute)   @ ft. of head
2' 4' 8' 12' 16' 20'
SCCP50 250 200 135 30 - -
SCCP75 360 345 255 - - -
SCCP100 380 340 250 150 - -
SCCP402 500 477 375 11' max - -
SCCP403 570 560 470 275 - -
SCCP605 1070 1050 990 910 15' max -
SCCP607 1240 1220 1150 1070 940 830
SCCP610 1470 1450 1400 1360 1230 -

Pumping Rates
Medium Head/Medium Volume Impeller

Product Code GPM @ ft. of head
2' 4' 8' 12' 16' 20'
SCCP402 335 260 185 110 - -
SCCP403 360 300 235 175 120 -
SCCP605 820 745 670 600 540 -
SCCP607 1020 950 870 770 620 500
SCCP610 1230 1160 1100 980 810 660

Use one of our pump intake screen or PVC intake horns below to use with these pumps.
 

wpe2B.jpg (1659 bytes)

 

Carry Horizontal Pump Shown With Intake Screen

 Pump Intake Screen
 These heavy duty screens are designed to be used with these pumps to prevent sticks, weeds, fish, etc. from plugging pump.  Screens are made from SDR35 PVC and high density polyethylene top and bottom plates.  Screen portion is perforated with 1/2" holes.  Shown with pump listed above.


For 1.5, 2 and 3 HP pumps listed above
16" tall x 14" in diameter

Product Code:  SCCPSA
Our Price:  $399.00

BUY!

 

For 2, 3HP Pumps listed above
Product Code:  SCPSB
Price:   $419.00

BUY!

 


For 5, 7 1/2, 10 HP pumps listed above
Product Code:  SCCP16
Price:  $529.00


 BUY!

 

 
 

wpe2B.jpg (1659 bytes)

 


Carry Horizontal Pump Shown With Intake Horn

PVC Intake Horns
Intake horns are a factory installed option that are used when pumping in shallow applications to direct the suction towards the bottom of the pump and prevent pumps from sucking air.  Highly recommended on larger pumps being used in ponds or pools less than 30" deep.

Product Code:  SCCPI4
For 1/2 - 3 HP Pumps listed above
Price:  $110.00

BUY!

 

Product Code:  SCCPI6
For 5 - 10 HP pumps listed above
Price:  $295.00

BUY!

 
 

wpe2B.jpg (1659 bytes)

 

High Volume Submersible Pumps by Goulds  ITT Industries
For high volume, continuous water needs, these pumps are a great choice!  These pumps are rated for "heavy duty" applications and will provide years of reliable use.
  • 20' "severe duty" power cords, standard
  • 4" discharge
  • non clog, cast iron impellar
  • built in thermal protection with automatic reset
  • 230 volt, 1750 rpm motors - single phase, 230/460 volt,
    1750 rpm motors - 3 phase.
  • capable of running dry without damage.

 

Product Code hp 230 volt
amps		 GPM @10' head GPM @ 15' GPM @ 20' GPM @ 25' GPM @30' Ship Weight
lbs.		 Price Buy
SCWS15 1.5 13.2 395 320 230 120 22 195 $2,195.00 BUY!
SCWS20 2 16.3 - 370 300 205 100 200 $2,445.00 BUY!
SCWS30 3 21.5 - 440 365 270 160 208 $2,895.00 BUY!
SCWS50 5 26.5 - - 520 440 360 213 $3,195.00 BUY!
 

wpe2B.jpg (1659 bytes)

 

wpe69.jpg (3522 bytes)

 High Volume Submersible Pump
Smaller versions of our SCWQ50 pumps.  For use as waterfalls, decorative ponds and can be used in our large pond skimmers.
  • 3450 rpm motors
  • 2" discharge
  • 33' power cord
  • built in thermal protection with automatic reset
  • single phase, 2 pole motors
  • 115 volt only
  • Use in our large pond skimmer

 

Product Code hp amps GPM @ 5' GPM @ 10' GPM @ 15' GPM @ 20' GPM @ 25' Price Buy
SCFQ05 1/2 10 110 90 65 35 - $388.00 BUY!
SCFQ10 1 9 150 135 125 110 85 $478.00 BUY!
 

wpe2B.jpg (1659 bytes)

 

High Volume Submersible Pump by Berkeley
High volume, reliability & energy efficienct!  It's one of our favorites!  World famous Berkeley quality at an affordable price!  2" discharge.  Use with 3" pipe and check valve for maximum flow!  20' power cord.  Automatic thermal protection with auto reset.  A great pump for larger, low head waterfalls.  UL Listed. 

 
Product Code HP Amps Volts GPM @ 5' Head GPM @ 10' Head GPM @ 15' Head GPM @ 20' Head GPM @ 25' Head Ship Weight Price Buy!
SCBSP50 1/2 9 115 160 124 86 47 9 60 lbs. $585.00 BUY!
SCBSP502 1/2 5 230 160 124 86 47 9 60 lbs $620.00 BUY!
 

wpe2B.jpg (1659 bytes)

 

High Volume Industrial Pump by Berkeley
These industrial quality pumps will not only provide high volumes of water, they are designed for years of reliable performance.  Heavy duty iron construction will withstand operation in the toughest environments.
  • 20' power cord
  • 3" discharge
  • 230 volt motors
  • dual shaft seals for extra motor protection
  • built in thermal protection with automatic reset
  • designed for use with debris laden water

 

Product Code HP 230 V. Amps GPM @ 10' Head GPM @ 15' Head GPM @ 20' Head GPM @ 25' Head GPM @ 30' Head GPM @ 35' Head GPM @ 40' Head Ship Weight Price Buy!
SCBSP75 3/4 7 162 133 104 50 - - - 112 lbs. $975.00 BUY!
SCBSP100 1 8.5 186 167 147 118 81 48 - 118 lbs. $999.00 BUY!
SCBSP200 2 13 231 209 192 171 150 124 99 120 lbs. $1,150.00 BUY!

 
 

wpe2B.jpg (1659 bytes)

 

EasyPro Energy Efficient, Long Lasting Stainless Steel Submersible Pump
Great pumps for waterfalls and streams!
  • Rugged motor - designed for long life, continuous duty operation; motor housing is corrosion-resistant stainless steel.
  • Low maintenance - pump casing is made from abrasion-resistant, fiber- reinforced plastic for maximum life
  • Vortex design prevents clogging
  • Built-in overload and overheat motor protection
  • 2" female threaded outlet
  • 20' power cord
  • Now available in 4 sizes, 2900, 3900, 4900 and 5900 GPH
  • 2 year manufacturer's warranty!

 

Product Code GPH HP Amps GPM @ 0' Head GPM @ 5' Head GPM @ 10' Head GPM @ 15' Head GPM @ 20' Head Max. Head Ship Weight Price Buy!
SCTH150 2900 1/4 2.9 48 41 32 20 12 21' 19 lbs. $349.00 BUY!
SCTH250 3900 1/3 4.0 65 55 46 35 24 27' 22 lbs. $419.00 BUY!
SCTH400 4900 1/2 5.6 82 74 63 57 48 32' 25 lbs $469.00 BUY!
SCTH750 5900 1 9.5 98 95 89 83 79 43' 28 lbs $545.00 BUY!
 

wpe2B.jpg (1659 bytes)

 

EasyPro Large Volume Waterfall Pumps
These larger volume pumps are ideal for higher head applicatons where the pumps above are not enough.  Built heavy-duty, these pumps push a lot of water and maintain good flow even at higher head pressure.
  • Compact design - high output in a small package
  • Continuous duty, air-filled motors - designed for the demanding job of consistent operation in pond and waterfall applications
  • Motors have thermal overload protection as well as overheat protection with auto reset
  • Built from cast iron and stainless steel for maximum durability
  • Double mechanical seal ensures long term operation
  • Corrosion resistant aluminum impellar
  • One year manufacturer's warranty
  • Vortex design helps eliminate plugging
  • 2" outlet
  • 115 volt
  • 30' power cord

 

Product Code GPH Amps/Volts GPM @ 0' head GPM @ 5' head GPM @ 10' head GPM @ 15' head GPM @ 20' head GPM @ 25' head Ship Weight List Price: Our
Price		 Buy!
SCEP6000 6,000 6.9/115 112 106 91 81 71 48 47 lbs. $619.88 $519.00 BUY!
SCEP8000 8,000 9.6/115 138 131 111 90 72 52 50 lbs. $638.18 $538.00 BUY!
SCEP10000 10,000 10.5/115 163 160 153 133 110 90 52 lbs. $716.07 $646.00 BUY!
SCEP16000 16,000 9.1/230 268 261 252 232 212 199 59 lbs. $1,274.85 $999.00 BUY!
 

wpe2B.jpg (1659 bytes)

 

 

Order Info     |    Contact Info

wpe2B.jpg (1659 bytes)


©Copyright 2000 - 2008, absoluteponds.com.  All Rights Reserved. 
No contents may be copied or reproduced without prior written permission.